Water, Inc.Water, Inc. Water filtration systems, premium household products 1-800-322-WATER (9283)














Premier Products


Compare all
Housepure® Products

HousePure® Soft-2 whole house water softener
   

HousePure® Soft whole house water softener

HousePure® Soft Water Softener


The Water, Inc high flow industrial water softener provides whole-house protection against costly water hardness scaling and lime scale build-up. Enjoy the gentle caress of softened water from every faucet, bath and shower. Extend the life of your home: softened water protects appliances, fixtures and plumbing lines. The HousePure® Soft is an ideal solution for hard water spotting and scaling damage.

Depending on your water flow rate in your home or business, you can choose between HousePure® Soft-2 and HousePure® Soft-4.

See below for specifications of each product.

HousePure® Soft-2

Part # WI-HP-SOFT-2

Shipping Wt: 185 lbs.

Features high flow 1-¼” to 1-½” inlet/outlet connections and a ½” discharge outlet. An electronic water meter provides quick setup and programming, while an integrated power backup offers peace-of-mind during power interruptions. The softener regenerates and self cleans on a regular basis. Ideal for indoor and outdoor installations. (See acceptable temperature range specifications shown below.)

  • Includes Installation Parts and Install/Owner’s Manual
  • Certified Flow Rate: 19.2 gallons/minute
  • Dimensions (Including Salt Tank): Width: 32” Height: 63” Depth: 22”
  • Filter Capacity: 48,000 grains of hardness
  • Media Volume: 2 cubic feet of high capacity cation resin
  • Salt Tank Size: 400 lbs. (Can be used with either potassium or sodium salt types)
  • Operating Temperature Range: 34ºF to 110ºF ( outdoor install not appropriate for freezing temperatures)
  • Water Pressure Range: 20 PSI to 80 PSI (rated for pressure spikes to 125 PSI)
  • Water Quality: Not for use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • Operating Voltage: 24 VAC, 50/60 Hz, 120 VAC transformer included

HousePure® Soft-4

Part # WI-HP-SOFT-4

Shipping Wt: 400 lbs.

The HousePure Soft 4 is an excellent option for larger homes and businesses that require higher flow rate and/or more water softening capacity. With 96,000 grains per gallon capacity, this 4 cubic foot softener will handle the most demanding hard water applications. The HP-Soft-4 has a 2” inlet and outlet, which can be bushed down to accept smaller pipe sizes if needed. The unit includes a 2900 series commercial, 24VDC controller and a 3200 2” metered valve.

  • Includes Installation Parts and Install/Owner’s Manual*
  • Peak Flow Rate: 50 gallons/minute
  • Dimensions (Including Salt Tank): Width: 42” Height: 80” Depth: 40”
  • Filter Capacity: 96,000 grains of hardness
  • Media Volume: 4-cubic feet, high capacity cation resin
  • Salt Tank Size: 750 lbs. (Can be used with either potassium or sodium salt)
  • Operating Temperature Range: 34ºF to 110ºF (Not appropriate for freezing
    temperatures.)
  • Pipe Size: Inlet- 2”, Outlet- 2”, Drain- 1”
  • Water Pressure Range: 20 PSI to 75 PSIPSI)
  • Water Quality: Not for use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • Operating Voltage: 24 VAC, 50/60 Hz, 120 VAC transformer included.

* Must be installed by a qualified water treatment professional.